TATA 407 TRUCK (4 x 2)
MAINTENANCE The
proper maintenance to TATA
407 TRUCK (4 x 2) is not only reduce downtime and keep it in good
appearance, but also it increase the stipulated life
of it. So all driver should be give good maintenance to TATA 407 TRUCK (4 x 2) in its due time with out fail.
RECOMMENDED
OIL AND PERIODICITY OF
TATA 407 TRUCK (4 x 2)
|
||||||
Sl No
|
Assembly
|
Grade of oil
|
Qty
|
Periodicity
|
Remarks
|
|
01
|
Engine Oil
|
SP 30 /SAE
15W 40
|
8 Ltr
|
18000/ 9000
|
Servo pride 30 to be changed at 18000 Kms & other grades
at 9000 Kms
|
|
02
|
Oil filter
|
SP 30 /SAE 15W 40
|
1 Ltr
|
|||
03
|
Gear box : GBS-18
|
Servo Trans Fluid ‘A’
|
2.90 Ltrs
|
18000
|
||
04
|
Rear axle
|
Servo Gear Super – 90
|
1.50 Ltrs
|
18000
|
||
05
|
Steering gear box
|
-do-
|
0.50 Ltr
|
9000
|
||
06
|
Cooling system
|
Telco Super Kool
|
13 Ltr
|
|||
07
|
Fuel Tank
|
HSD
|
60 Ltr
|
|||
08
|
Wheel bearing
|
Servo Grease HP
|
10000
|
Front hub – 140 gms
Rear hub – 300
|
||
Air filter :
Dry type
Oil filter :
Full flow paper type
Fuel filter
: Two stage pre and fine filtration
FIP : in
line type-mico
The gross
vehicle weight should not exceed 3.5 tones
Maximum oil pressure (New engine) : 5.2 +- 0.5 bar
Min oil
pressure for used engine : 2.5 bar at Max speed 0.5 bar at idling speed
(The information given above as per GMI or in connection with manufactures' reference.)
For complete details of TATA 407 TRUCK (4 x 2) vehicle refer GMI No : 207
For complete details of TATA 407 TRUCK (4 x 2) vehicle refer GMI No : 207
This comment has been removed by a blog administrator.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteVERY INFORMATIVE ARTICLE. Thanks
ReplyDeletewww.cosmopolitanmechanical.ca