Concrete Mixing Plant 30 cum/hr Akona-Hycon AP-30

MAINTENANCE   The proper maintenance to  Concrete Mixing Plant 30 cum/hr  Akona-Hycon AP-30  is not only reduce downtime and keep it in good appearance, but also it increase the stipulated life of it. So all operator should be give good maintenance to  Concrete Mixing Plant 30 cum/hr  Akona-Hycon AP-30  in its due time without fail

 RECOMMENDED OIL AND PERIODICITY OF

Concrete Mixing Plant 30 cum/hr  Akona-Hycon AP-30
Sl No	Assembly	Grade of oil		Qty	Periodicity	Remarks
01	Engine Oil	20W 40		20 ltrs	250 Hrs
02	Gear box for Skip	Gear oil Grade 90		7 L	2500 Hrs	500  Hrs First
03	Gear box for Pan Mixer	Gear oil Grade 90		8 L	2500 Hrs	500  Hrs First
04	Gear box for Boom Scrapper	Gear oil Grade 90		5L	2500 Hrs	500  Hrs First
05	Blade Arm housing	Gear oil Grade 90		5L	2500 Hrs	500  Hrs First
06	Cement screw conveyor	Gear oil Grade 90		10 (5 L each up & down)	2500 Hrs	500  Hrs First
07	Hydraulic system	SU / KB 10 W		20	500 Hrs
08	Compressor	T 57		1 L	1200 Hrs	200 Hrs First
09	Fuel Tank	HSD

a) Engine : Cummins water cooled Turbo charged

Complete plant can be transported in one 40 feet Trailer

Boom Scrapper, Aggregate feed chute, Aggregate weighing batcher,   Concrete mixer pan type, Cement Silo, Cement feeder system, Portal structure, water weigh system, Control Panel, Air Compressor & water pump, water pump and Electrical motors (power source) shall be powered by Gen set 125 KVA

Self lubricated ZZ type Bearings replace after every 4800 hrs

Winch system of Scrapper Cabin Greasing to be done after every three months

The information given above is as per GMI or manufactures literature. For more technical futures of Concrete Mixing Plant 30 cum/hr  Akona-Hycon AP-30 refer GMI No 245