Search This Blog

Friday, 12 February 2016

Liftall crane



MAINTENANCE   The proper maintenance to Liftall (JCB Crane) is not only reduced downtime and kept it in good appearance, but also it increased the stipulated life of it. So all driver should be give good maintenance to Liftall (JCB Crane) in its due time without fail.

RECOMMENDED OIL AND PERIODICITY OF

Liftall (JCB Crane)

Sl No
Assembly
Grade of oil
Qty
Periodicity
Remarks
01
Engine Oil
SAE15W 40 CI 4
8.5 Ltr
400 Hrs
100 Hrs First
02
Transmission & Axle
SAE 15W 40 CI 4
47 Ltr
1300 Hrs

03
Hydraulic system
HLP 68
90 Ltr
900 Hrs

04
Winch motor
SGS-90
2 Ltr
400 Hrs
100 Hrs First
05
Fuel Tank
HSD
60 Ltr


06
Eng Coolant
ethylene glycol antifreeze                 (50-50 mixer)
10 Ltr
900 Hrs








Engine – Kir BS-III 4R 810 -4 cyl water cooled Naturral aspirated diesel eng,  49 BHP at 2000 RPM, Maxm Tourque 210 NM at 1300 RPM, Heavy duty Gear Box with 8 fwd and 2 rev with high/ low speed arrangements, Single plate friction type clutch plate -12 inch dia, Tyre- front 1100x 20.00 - 18 PR x 4 Nos, rear 1300 x 24.00 -  12 PR x 2 Nos, Battery 12V 88 AH  x 1 Nos, Operating weight 11700 Kgs (Unladen), Length 11525 mm,  width 2540 mm  Height 3230 mm, Speed 30 Km ph (Unladen)

Maintenance Parts
Part No:
Air Filter Outer
332/Y3804
Air Filter Inner
332/Y3805
Lube oil Filter
332/Y3798
Diesel Filter -paper
332/Y3802
Diesel Filter -Cloth
332/Y3801
Hyd Filter
332/Y3796
Hyd. Strainer
332/Y0518

The information given above is as per manufactures literature/recommendations.
                                                            _________

1 comment:

  1. This comment has been removed by a blog administrator.

    ReplyDelete