JCB Exca with JCB Engine

MAINTENANCE   The proper maintenance of JCB Excavator is not only reduced the downtime and keep it in a good appearance, but also it increase the stipulated life of it. So all operator should be give good maintenance to JCB Excavator in its due time without fail.

RECOMMENDED OIL AND PERIODICITY OF

JCB 4DX, 3DX- Xtra & 3DX Super EXCAVATOR CUM LOADER (JCB Engine 444 or 448)
Sl No	Assembly	Grade of oil		Qty	Periodicity	Remarks
01	Engine Oil	SAE 15 W 40 CI 4		11.5 Ltr	500Hrs
02	Oil Filter	SAE 15 W 40 CI 4		1 Ltr	400 Hrs
03	Transmission	Servo transmission fluid F 10		19 Ltr	500 Hrs	1st at 1000 Hrs
04	Rear Axle drive	Servo trans T-20		24.5 Ltr	500 Hrs	1st at 1000 Hrs
05	Hydraulic system	HLP-46		128 Ltr	2000 Hrs
06	Slew actuator	Servo Gear super 90W		4.3 Ltr	400 Hrs
07	Engine Coolant	ethylene glycol antifreeze                 (50-50 mixer)		23 Ltr	1000 Hrs
08	Front axle (For 4WD)	Servo Gear super 80W		14. Ltr	500Hrs	1st at 1000 Hrs
09	Brake system	Castrol Hypsin AWH-15		1.2 Ltr	-
10	Fuel	HSD		130 Ltr

Note: Hyd and Transmission filters to be changed first time at 100 Hrs.  MRV Pressure 3300 PSI, Unloader pressure 3000 PSI,  Hyd oil flow: a) 4DX-154 LPM, b) 3DX-110 LPM, c)  3DX Super-101-118 LPM and d)  3DX Xtra-123 LPM. Eng Oil pressure 4.5-5.5 bar after 20 min run. High water temp at 112 ^o C.

Parts	Part No
Air filter Inner	32/915801
Air filter Outer	32/915802
Hyd. Filter	40/300893
Transmission Filter	581/18063
Fuel Filter	320/07155
Fuel Filter-WATER SEP	32/925994
Lube oil Filter	320/04133A
Breather Filter	550/43485
Strainer	32/920300

For complete Kit         333/Y0703

The above information is as per manufactures literature/ recommendations.

                                                    ________